Rated Load/person (kg/unit): | 200/2 | Rated Running Speed (m/min): | 24 |
---|---|---|---|
Installation Height (m): | 150 | Cabin Dimensions (m X M): | 0.6 X 1.1 X 2.0 |
Motor Power (kW): | 2.2 | Mast Section (m): | 1.508 |
Power Supply: | Three-phase Five-wire 380V 50Hz | Control Voltage (V): | 24 |
High Light: | 24m / Min construction hoist,150m construction hoist |
Construction Platform Lift Tower Crane Mast Section Aluminum Alloy Safety Access
SC20 Lift is specially designed to enter the vertical transportation equipment on the top of the tower crane. It can be installed on the standard sections of tower cranes of different brands. Depending on the Mast section of the tower crane, it can be installed outside the mast section or inside the standard section. The mast section is made of aluminum alloy, light weight, very easy to install and transport. The car door is a link mechanism with a lateral protection device and a sliding door that enters the car from the tower crane facing. There is an active escape skylight on the top of the car for emergency rescue.
Technical parameter
Rated load/person (kg/unit) |
200/2 |
Rated running speed (m/min) |
24 |
Installation height (m) |
150 |
Cabin dimensions (m x m) |
0.6 x 1.1 x 2.0 |
Motor power (kW) |
2.2 |
Mast section (m) |
1.508 |
Rack module |
6 |
Power supply |
three-phase five-wire 380V 50Hz |
Control voltage (V) |
24 |
Safety Devices
Geared brake motor drive
Progressive overspeed protection safety device
Overload protection
Emergency stop device
Stroke limit device
Stroke limit
Non-slip floor
Landing door with electromechanical interlocking device
Frequency Control
Low voltage panel
Power phase loss and phase sequence protection
Cabin escape window
Cabin safety fence